Panasonic PT-RQ25K Series

Chapter 4 Settings — [SECURITY] menu
216 - ENGLISH
2) Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROL] You can set the limitation on the control from the remote control.
4) Press the <ENTER> button.
f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press qw to switch the item.
f You can set the operation restriction from the control panel or the remote control.
[ENABLE] Enables all button operations.
[DISABLE] Disables all button operations.
[USER]
Operation of all buttons can be enabled/disabled separately.
Refer to “Enabling/disabling any button” (x page 216) for details.
7) Press as to select [APPLY], and press the <ENTER> button.
f The conrmation screen is displayed.
8) Press qw to select [OK], and press the <ENTER> button.
Enabling/disabling any button
1) Press as to select [CONTROL DEVICE SETUP].
2) Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
4) Press the <ENTER> button.
f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press qw to switch [USER].
7) Press as to select the button item to set.
f When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press as to select
the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] <STANDBY> button, <POWER ON> button
[INPUT SELECT BUTTON]
<HDMI 1/2> button, <DISPLAYPORT> button,
<SLOT> button, <INPUT MENU> button
<HDMI> button, <DISPLAYPORT> button, <SDI>
button, <DIGITAL LINK> button, <SLOT 1>
button, <INPUT MENU> button
[MENU BUTTON] <MENU> button
[LENS BUTTON] <LENS> button Lens buttons (<FOCUS>, <ZOOM>, <SHIFT>)
[SHUTTER BUTTON] <SHUTTER> button
[ASPECT BUTTON] ― <ASPECT> button
[ON SCREEN BUTTON] <ON SCREEN> button
[OTHER BUTTON] Buttons not listed above
8) Press qw to switch the item.
[ENABLE] Enables button operations.
[DISABLE] Disables button operations.