Panasonic PT-RQ25K Series

Chapter 5 Operations — Using the information monitor function
ENGLISH - 285
[WIRED LAN] Select this item when the information of the wired LAN is to be displayed.
[WIRELESS LAN] Select this item when the information of the wireless LAN is to be displayed.
7) Press the <ENTER> button.
f The detailed item is displayed when [PJ NAME] or [WIRELESS LAN] is selected in Step 6).
f The IP selection screen is displayed when [WIRED LAN] is selected in Step 6). Proceed to Step 9).
8) Press as to switch the item.
f The display items will switch each time you press the button.
Network selection item Detailed item Details
[PJ NAME] [PROJECTOR NAME] Displays the [PROJECTOR NAME].
[WIRELESS LAN]
[SSID] Displays the string of SSID.
[KEY]
Displays the connection key.
Displays/hides the connection key by pressing the <ENTER>
button.
[AUTHENTICATION] Displays the user authentication method.
[ENCRYPTION] Displays the encryption method.
QR code
A QR code, which makes connection setting with a smartphone
easier, is displayed. To directly connect a smartphone to the
projector using the QR code, refer to “Using the QR code”
(x page 237).
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[MAC ADRESS] Displays the [MAC ADDRESS] of wireless LAN.
9) Press as to switch the item.
f The display items will switch each time you press the button.
[IP VERSION] Select this item when [IP VERSION] is to be displayed.
[IPv4] Select this item when the information of wired LAN (IPv4) is to be displayed.
[IPv6] Select this item when the information of wired LAN (IPv6) is to be displayed.
10) Press the <ENTER> button.
f The detailed item is displayed.
11) Press as to switch the item.
f The display items will switch each time you press the button.
IP selection item Detailed item Details
[IP VERSION] [IP VERSION] Displays the [IP VERSION].
[IPv4]
[DHCP] Displays the [DHCP] setting.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[MAC ADRESS] Displays the [MAC ADDRESS] of wired LAN.
[IPv6]
[AUTO CONFIGURATION] Displays the [AUTO CONFIGURATION] setting.
[LINK LOCAL ADDRESS]
Displays [LINK LOCAL ADDRESS] and [PREFIX LENGTH].
Press qw to switch display.
[STATEFULL ADDRESS]
Displays [STATEFUL ADDRESS] and [PREFIX LENGTH].
Press qw to switch display.
[STATELESS ADDRESS]
Displays [STATELESS ADDRESS] and [PREFIX LENGTH].
Press qw to switch display.
[TEMPORARY ADDRESS]
Displays [TEMPORARY ADDRESS] and [PREFIX LENGTH].
Press qw to switch display.
[IP ADDRESS]
Displays the [IP ADDRESS].
Press qw to switch display.
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
Press qw to switch display.
[MAC ADRESS] Displays the [MAC ADDRESS] of wired LAN.