K
kennedypennySep 12, 2025
What to do if the lens shift cannot be adjusted on Panasonic PT-RQ25K Projector?
- DDavid DavisSep 12, 2025
Perform lens calibration. Also, verify if the fixed-focus lens (Model No.: ET?D3LEW50, ET?D75LE50) is attached.

What to do if the lens shift cannot be adjusted on Panasonic PT-RQ25K Projector?
Perform lens calibration. Also, verify if the fixed-focus lens (Model No.: ET?D3LEW50, ET?D75LE50) is attached.
Why don't the buttons on the Panasonic Projector control panel operate?
Check if the control panel setting in the control device setup is set to disable. Also, verify if the terminal is used for contact control.
Why geometric adjustment is not possible on Panasonic PT-RQ25K?
Check if [QUAD PIXEL DRIVE] is set to [OFF]. Note that this solution applies only to PT?RQ25K and PT?RQ18K models.
| Brightness | 25, 000 lumens |
|---|---|
| Contrast Ratio | 20, 000:1 |
| Light Source | Laser |
| Light Source Life | 20, 000 hours |
| Control Terminals | RS-232C, LAN, USB |
| Weight | Approx. 86 kg (189.6 lbs.) (without lens) |
| Lens Options | Interchangeable lenses |
| Connectivity | HDMI, DVI-D, 3G-SDI |
| Throw Ratio | Depends on lens (refer to lens specifications) |
| Lens Shift | Vertical: +/- 60%, Horizontal: +/- 30% |
| Input Terminals | HDMI, DVI-D, 3G-SDI |
| Output Terminals | SDI OUT |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |












Loading...