Parker Hannifin
- x -
Important User Information
Important User Information
It is important that motion control equipment is installed and operated in such
a way that all applicable safety requirements are met. It is your responsibility
as an installer to ensure that you identify the relevant safety standards and
comply with them; failure to do so may result in damage to equipment and
personal injury. In particular, you should study the contents of this user guide
carefully before installing or operating the equipment.
The installation, set up, test and maintenance procedures given in this user
guide should only be carried out by competent personnel trained in the
installation of electronic equipment. Such personnel should be aware of the
potential electrical and mechanical hazards associated with mains-powered
motion control equipment—please see the safety warnings below. The
individual or group having overall responsibility for this equipment must
ensure that operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any
incidental, consequential or special damages of any kind whatsoever,
including but not limited to lost profits arising from or in any way connected
with the use of the equipment or this guide.
Warning — High-performance motion control equipment is capable of producing
rapid movement and very high forces. Unexpected motion may occur especially
during the development of controller programs.
KEEP WELL CLEAR of any
machinery driven by stepper or servo motors. Never touch any part of the equipment
while it is in operation.
This product is sold as a motion control component to be installed in a complete
system using good engineering practice. Care must be taken to ensure that the
product is installed and used in a safe manner according to local safety laws and
regulations. In particular, the product must be positioned such that no part is
accessible while power may be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries, and
authorized distributors provides product or system options for further investigation by
users having technical expertise. Before you select or use any product or system, it is
important that you analyze all aspects of your application and review the information
concerning the product in the current product catalog. The user, through its own
analysis and testing, is solely responsible for making the final selection of the system
and components and assuring that all performance, safety, and warning requirements
of the application are met.
If the equipment is used in any manner that does not conform to the instructions
given in this user guide, then the protection provided by the equipment may be
impaired.
The information in this user guide, including any apparatus, methods,
techniques, and concepts described herein, are the proprietary property of
Parker Hannifin or its licensors, and may not be copied disclosed, or used for
any purpose not expressly authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we
reserve the right to modify equipment and user guides without prior notice.
No part of this user guide may be reproduced in any form without the prior
consent of Parker Hannifin.
To Next Page
Loading...
