Parker Hannifin
Chapter 4 Communications - 43 -
Setting the IP Address and Subnet Mask—PC
Now set the IP address and Subnet mask for your PC. (These instructions
are for Windows XP users. If you have another Windows version, the steps
may vary. Please consult your Network Administrator.)
1. Open the Control Panel on your PC by clicking on START, selecting
Settings, and clicking on Control Panel.
2. Double-click on Network Connections. Your screen should look
similar to this:
Figure 25 Network Connections Screen
3. Select the LAN or High-Speed Internet connection that you want to
use for the Aries Controller network. In the example above, it is
Local Area Connection 2.
4. Click File>Properties to open the Local Area Connection Properties
window similar to the one below:
Figure 26 Local Area Connection Properties Screen
To Next Page
Loading...
