Parker Hannifin
P Series User Guide 313
Figure3-13.5
E. Click ‘Start’ to begin transmission. The system down counts 10 seconds while
it clears the drive’s internal memory.
F. The OS is automatically transmitted after the memory is cleared. You can see
the current progress through the progress bar and ‘current packet.’ The
transmission time varies depending on the PC’s performance, from tens of
seconds to a few minutes.)
G. ‘Transmission completed’ window pops up when the transmission is properly
competed (after transmission, turn off and on the drive to reboot it.)
When an error occurs during transmission
To Next Page
Loading...
Need help?
General
