Parker P Series

Parker Hannifin
P Series User Guide 173
0x2303 -
Speed Command S-
curve Time
UINT RW No ms
Table 89. Procedure Function Related Objects
7.1.2 Program Jog Operation
Jog operation is a function to check the action of the servo motor by speed control, without
the host device, based on the preset operation speed and operation time.
Please check the following before operation
 The main power is ON
 No alarm
 Servo is OFF
 Speed and time are set considering the condition of the machine
Figure 54. Program Jog Operation
www.comoso.com