Be sure to follow the instructions when you
operate the machine and/or labor saving
device.
If you use the machine and/or labor saving
device incorrectly, you may get an electrical
shock.
If you use the machine and/or labor saving
device incorrectly, your hands and/or
fingers may be injured.
Unplug the machine and shut off the power
when checking, adjusting and/or repairing
t
he machine and/or labor saving device,
or when lightning may strike.
Denotes the normal rotating direction of the
machine pully.
If you use the machine and/or labor saving
device incorrectly, you may burn yourself.
Never do this.
Be sure to connect to ground .
3.Safety precautions
Applications, purpose
Our industrial sewing machines have been developed in order to
increase quality and/or production in the sewing industry.
Accordingly never use our products for other than intended use
described above.
Circumstances
The environment in which our industrial sewing machines are used
may seriously affect their lives, functions, performance and/or
safety.
For safety, do not use the labor saving device under the
circumstances below.
1.Do not use the machine near objects which make noise such as
a high-frequency welder, etc.
2.Do not use or store the machine in the air which has vapor from
chemicals, or do not expose the device to chemicals.
3.Do not leave the machine outside, in high temperatures or the
direct sun.
4.Do not use the machine in the places of high ambient
temperature and humidity that seriously affects sewing
machines.
5.Do not use the machine on the condition that the voltage
fluctuation range is more than ± 10% of the rated voltage.
6.Do not use the machine in the place where the supply voltage
specified for the control motor cannot be properly obtained.
Safety measures
(1)Safety precautions when you perform maintenance on
the machine.
● Always turn off the power, unplug the machine and then make
sure that the machine does not run by pressing the treadle
before performing any maintenance, such as checking,
repairing, cleaning, etc. However, if you need to perform these
procedures with the power on, to prevent accidents due to
the unexpected start of the machine and users’ misoperation,
estabish your oun procedures for safety and follow them.
Be sure to study very carefully for safety.
安全のために
To Next Page
Loading...
