安全のために
Be sure to study very carefully for safety.
4.Notes for each procedure
CAUTION
Unpacking
1.The machine is packaged in a cardboard box before shipping.
Unpack your machine in orderly sequence while checking them
right-side up by referring to the indications, such as logo, etc.
printed on the boxes.
2.Never hold the area near the needle and/or thread guide related
parts when taking out the machine from the cushion.
Otherwise it may cause injury and/or damage to the machine.
3.Take out the machine very carefully while checking the position
of the center of the gravity.
4.Keep the cardboard box and packing carefully in case
secondary transport is needed in the future.
Disposal of the packaging
The packaging material of the machine consists of wood, paper,
cardboard and VCE fiber. The proper disposal of the packaging
is the responsibility of the customer.
Disposal of machine waste
1.The proper disposal of machine waste is the responsibility of the
customer.
2.The materials used on the machines are steel, aluminum, brass
and various plastics.
3.The machine waste is to be disposed of in accordance with the
locally valid environmental protection regulations. A specialist
should be commissioned if necessary.
The parts contaminated with lubricants should be disposed
off separately according to the locally valid environmental
protection regulations.
Transport within the customer’s premises
The manufacturer assumes no liability for transport within the
customer’s premises. Care should be taken to transport the
machine in an upright position avoiding it from dropping or
falling down to the ground when it is moved.
To Next Page
Loading...
