Perfect Point E-Drill - Page 43

15192 Triton Lane
Huntington Beach, CA 92649
Office Tel: 714-892-3400
Hotline Tel: 714-891-6533
www.ppedm.com
User Guide
Document No.
61-101
Revision:
107
Date:
10/18/2018
This document is the property of PPedm Corp. and contains proprietary and/or patented information and may not be reproduced in
part or in whole without the express written permission of the company. Perfect Point logo, Perfect Point
TM
and E-Drill
®
are
trademarks of PPedm, Corp. US and worldwide patents pending.
Page 43 of 76
4. Push and engage the Torque-ring Wrench over the electrode and tighten. The
torque-ring will “skip” when the required torque is reached. Remove the Torque-
ring and replace the E-Drill Adapter on the front of the hand-tool.