2–1
Engine immobilizer system
The engine immobilizer system is a theft-
preventive system. When the key is inserted
into the ignition switch, the transponder chip
located at the key grip sends an electric signal
to the vehicle. Then, this electric signal is
matched with the ID code pre-registered in
the vehicle. If the electric signal is matched
with the ID code, the engine can be started.
If they are not matched with each other, the
engine cannot be started.
The system is maintenance-free.
When you make new keys, you are required
to bring your key along with the key number
to an authorised Perodua Service Centre.
Hence, we recommend that you keep the
key number plate in a safe place.
NOTE
You can register and make your keys up
to 4 pieces.
Key number plate
Key number plate
Type 1
Type 2
Ignition key with transmitter
Smart key
Keys
(with engine immobilizer system
The vehicle is equipped with two encoded
keys.
Only these two keys make it possible to start
your engine.
w WARNING
Do not make any alterations to the
immobilizer system.
NOTE
1. When it becomes necessary to make
a new key, for example, when you lose
one of your two keys, the remaining
one is needed for Perodua to make a
new key. Hence, be sure to keep one of
your two keys in a safe place.
Both of these two keys have a function
whereby the identification code of the
key can be inputted into the immobilizer
system. That is why you must bring your
key for producing the new key.
2. If you lose all the keys, consult with
an authorised Perodua Service Centre
immediately.
Sect 02_EN D42L.indd 1 24/10/2019 4:24 PM
To Next Page
Loading...
