3–4
1. Park the vehicle in a safe place.
2. Adjust the position of the front seat so
that the seatback of the rear seat may
not touch the front seat.
3. Release the seat belt from the seat belt
hanger and put it aside of the seat.
4. Lower the head restraint of the rear seat.
(if equipped)
Seat belt hanger
Folding the seatback
Rear seats
Before folding the seatback
CAUTION
When returning the seatback to its upright
position, be careful not to pinch the
webbing of the seat belt with the seatback.
Pinching the webbing may result in damage
to the webbing or otherwise impair the
effectiveness of the seat belt.
w WARNING
To reduce the risk and/or severity
of personal injury in the event of an
accident:
• Never allow anyone to ride in the
luggage room. It is not designed
for occupants.
• Do not pile anything in the luggage
room higher than the seatback.
• Make sure that the rear seatback
has been returned to the upright
position and securely locked with
seat belts fully visible.
1. Pull the seatback lock levers upward.
Slowly tilt the seatback.
Then release the lever.
2. Fold the seatback forward.
3. To return the rear seatback to its original
position, lift the seatback up until its
securely locked.
Sect 03_EN D42L.indd 4 24/10/2019 4:24 PM
To Next Page
Loading...
