3–2
Front seats
To adjust seat position
Raise the seat adjusting bar and slide the
seat to your desired position,while applying
slight body pressure in forward or backward
direction.
Then, release the lever.
To adjust seatback angle
Lean slightly forward and pull the reclining
lever upward. Slowly tilt the seatback to the
desired angle.
Then release the lever.
Reclining lever
w WARNING
• After adjusting, make sure the
seat is securely locked in position
by trying to slide it forward and
backward.
• If the seat is not locked securely,
the seat could move accidentally
and could cause loss control of
the vehicle.
• Never attempt to adjust the driver
seat while driving.
This could cause loss control of
the vehicle and an accident.
Sect 03_EN D42L.indd 2 24/10/2019 4:24 PM
To Next Page
Loading...
