4–7
Multi-control switch
Headlight control
To turn on/off high beam
With the headlights on, push the lever forward
to turn on high beam and pull it back to return
to low beam.
When the high beam headlights are turned
on, the indicator light on the instrument panel
will glow.
To flash lights
Pull the lever lightly and release.
The headlight flasher works with the headlight
is in “ON” or “OFF” position.
Turn the multi-control switch knob to turn the
headlights on.
Switch positions
Position
Light
Headlights
Clearance lights
Tail lights
License plate
lights
Instrument panel
lights
ON
ON
ON
ON
ON
OFF
ON
ON
ON
ON
2nd
stage
1st
stage
2nd stage
1st stage
High beam
Headlight flasher
CAUTION
• When driving through a town or when
there is an oncoming vehicle, high
beams may annoy or endanger the
vehicle or pedestrians. In these cases,
set your headlights to low beam.
• Avoid leaving lights on for a long time
after stopping the engine. This may
drain the battery.
Sect 04_EN D42L.indd 7 24/10/2019 4:25 PM
To Next Page
Loading...
