2–12
To support hood
Insert the hood brace into the slot on the hood.
w WARNING
Make sure the hood brace supports
the hood securely after inserting it.
Failure to do so may cause the hood to
fall and result in serious bodily injury.
To close hood
1. Set the hood brace in the original
position, while holding the hood by your
one hand.
2. Lower the hood. Pull your hands out and
away from the hood allowing it to drop
down and securely closed.
2. Stand in front of the vehicle. Raise the
auxiliary catch with your fingers and raise
the engine hood.
CAUTION
• Never open the hood with the wiper
arms and blades raised. The hood may
be scratched or the wiper arms and
blades may be damaged.
• Do not use tools to open the hood.
It may damage the latch.
Sect 02_EN D42L.indd 12 24/10/2019 4:24 PM
To Next Page
Loading...
