PERODUA Bezza - Page 387

3–39
• When the SRS air bag is scrapped;
• When electric welding is conducted;
• When body repairs are conducted;
• When paint repairs are conducted.
• When the front end structure is
changed;
• When any equipment is installed to
the front end, such as a grill guard
and winches;
2. Do not modify or replace the
steering wheel, other SRS air bag
related parts and the suspension
system. Such modification will
reduce the effectiveness of the
SRS air bag or make the SRS air
bag inoperative.
3. The SRS air bag may inflate
accidentally if the following
operations are performed. It may
lead to serious body injuries or
even death. For your enhanced
safety, be sure to have the removal
or installation, or inspection of the
steering-related parts conducted
by an authorised Perodua Service
Centre.
• Never attempt to remove the
steering wheel pad assembly by
yourself.
• Never check the SRS air bag system
with a circuit tester or the like by
yourself.
• Never heat the SRS air bag system
related parts with a heater or dryer.
Air bag computer
Air bag computer
w WARNING
1. Under no circumstance should the
air bag computer be removed or
disassembled. Failure to observe
this warning may cause the air bags
to deploy wrongly or fail to deploy
in the event of emergency.
2. Be careful not to apply water, juice
or anything similar to the air bag
computer.
3. Never strongly tap or kick the air bag
computer or its adjacent places.
Sect 03_EN D42L.indd 39 24/10/2019 4:25 PM