10–4
Shift lever button
Automatic transmission shifting
instructions
: Move the shift lever with the brake pedal
depressed and the shift lever button
pushed.
: Move the shift lever with the shift lever
button depressed.
: Move the shift lever without pressing
the shift lever button.
NOTE
• You cannot move the shift lever from
the P range to other ranges, unless
you are depressing the brake pedal.
• When the ignition switch is set to the
“LOCK” or “OFF” position, you cannot
move the shift lever from the P range
to other ranges, even if you depress
the brake pedal.
• There are cases where you cannot
move the shift lever if you depress the
brake pedal with the shift lever button
pushed first. In this case, return the
shift lever button to its original position.
Then depress the brake pedal first and
redo the operation.
The following shows the function of each
range.
For parking the vehicle, starting
the engine and removing the
ignition key
For reversing the vehicle
Neutral
The engine can be started in this
range. It is, however, advisable to
start the engine in the P range for
assured safety purpose
For normal driving
Gear shifting is carried out
automatically between the 1st gear
and the 4th gear according to
the vehicle speed
For engine braking or rapid
acceleration. Gear shifting is carried
out automatically between the
1st gear and 3rd gear according to
the vehicle speed
For effective engine braking
The transmission will not upshift
from the 2nd gear
3
2
4
Sect 10_EN D42L.indd 4 07/11/2019 8:26 AM
To Next Page
Loading...
