10–22
Hill-Start Assist helps to prevent the vehicle
from rolling back when starting up again from
a stopped position on an incline. As the driver
release the brake pedal slowly, vehicle retains
the brake force for about 2 seconds before
accelerates to continue driving.
Hill-Start Assist operates under this
condition:
• Engine is operated.
• The shift lever is in forward range on uphill
slope, or in reverse on downhill slope.
Hill-Start Assist is not operated if the shift
lever is in P or N.
• Brake pedal is pressed firmly and vehicle
has completely stops.
• Parking brake is released.
• Slip indicator light is turned "OFF".
Hill-Start Assist
(If equipped)
1. Release the brake pedal slowly. 2. Vehicle retains brake force for 2 seconds.
Steps for Hill-Start Assist
Sect 10_EN D42L.indd 22 07/11/2019 8:26 AM
To Next Page
Loading...
