10–39
In the following cases, the Pedal Misoperation
Control may operate even if there is no
possibility of collision.
1. When traveling and approaching the
front wall or front vehicle at the end and
stopping.
2. When running a place where the gradient
of the road suddenly changes.
3. When passing through a lump of water
vapor, fog or smoke.
4. When passing through a vinyl curtain, flag
and etc.
5. When front vision is bad caused by
exhaust gas, water vapor, sand, smoke,
dirt, splashed water, etc.
6. When passing the side of the stopped
vehicle with a slight gap, or the oncoming
vehicle approaches the own vehicle.
7. When using a vehicle elevator or a
mechanical parking lot.
8. When there is a large paint etc. on the
road surface.
9. When there are roadside objects such as
guardrails, signboards, groves or the like
at the intersections and the entrances of
the curves.
10. When there is an oncoming car to pass
by the curve.
11. When there is an obstacle at a curve or
an intersection.
12. When joining from parallel parking to main
line.
13. When the bar in the parking or toll gate
are not fully raised.
This function works when the vehicle is keep
stopping although the preceding vehicle has
already moved forward more than 3 meter.
The buzzer will sound and indicator blinks
to alert the driver.
When all of the following conditions are
satisfied, the function becomes operate.
• Shift position is other than P and R.
• Brake pedal is stepping on (Exclude when
shift position is N).
• Distance between the stopped preceding
vehicle and own vehicle is within about
10 meter.
• Over several seconds have passed since
both vehicles stopped.
Front Departure Alert
PiPiPi
about 3 meter
é
é
é
é
Sect 10_EN D42L.indd 39 07/11/2019 8:26 AM
To Next Page
Loading...
