11–7
Stowing the tools
1. Stow the tools in the tool bag as shown
in the illustration.
2. Fasten the jack handle and hub nut wrench
together with two bands and put them into
the tool bag.
3. Set the towing hook on the tool bag and
fasten with two bands at intervals.
Band
Band
w WARNING
• If your vehicle has a flat tyre, pull
off the road.
Avoid changing a flat tyre on a
slope.
• When changing a flat tyre on a road,
park the vehicle in a place that will
not obstruct traffic, turn on the
hazard warning signal lights and
put up a safety triangle if available.
• Move all passengers out of the
vehicle to a safe place and unload
any heavy luggage from the vehicle.
• Make sure the parking brake
is applied, and the manual
transmission is in 1st or in reverse,
or the automatic transmission in P.
• In the event of a flat tyre or tyre
burst while driving at high speeds,
hold the steering tightly. Gently
apply the brakes to slow down.
Sudden braking may cause a loss
of steering control and can be
dangerous.
Flat tyre
Sect 11_EN D42L.indd 7 25/10/2019 11:59 AM
To Next Page
Loading...
