12–2
Wax your vehicle on a regular basis to
preserve the paint finish.
Wash and dry the vehicle before waxing.
If the paint finish is hot, move the vehicle
into shade and allow the surface to cool
before waxing.
CAUTION
To protect paint finish;
• Do not rub the surface hard or rub with
hard cloth.
• Do not use steel wool or abrasive
cleanser.
• Follow the instructions of the wax
manufacturer.
Waxing
Interior cleaning
Clean the interior with a vacuum cleaner.
To clean leather, plastic, and cloth materials,
(such as air conditioning control panel, audio
panel, instrument panel, console panel,
switches, etc) use a soft cloth dampened with
a solution of mild soap and lukewarm water.
After cleaning, completely remove the
remaining soap with a soft cloth dampened
with water.
CAUTION
Gasoline or strong toxic solvents are not
recommended.
It may damage the materials.
CAUTION
• Do not use organic substances
(solvents, kerosene, alchohol, gasoline,
etc.) or alkaline or acidic solutions.
These chemicals can cause discoloring,
staining or peeling of the surface.
• If you use cleaners or polishing agents,
make sure their ingredients, do not
include the substances mentioned
above.
• If you use a liquid car freshener, do not
spill the liquid onto the vehicle’s interior
surfaces. It may contain the ingredients
mentioned above. Immediately clean
any spill using the method mentioned
above.
• When letting the cleaned part dry,
avoid direct rays of sun. Let it dry at
a well ventilated, shaded, dust-free
place. Otherwise, the materials may
deteriorate quickly.
Sect 12_EN D42L.indd 2 24/10/2019 4:29 PM
To Next Page
Loading...
