Philips IntelliVue MX40 - Page 166

Battery Specifications
10-16 Safety Standards & Specifications
Monitor Mode
Networked
(Display On)
Battery Life
(1.4GHz
p/n 865350)
Battery Life
(2.4GHz
p/n 865351)
ECG Only 10.5 hours 9.5 hours
ECG/SpO
2
FAST
Continuous
5.3 hours 2.5 hours
ECG/SpO
2
Masimo
Continuous
4.3 hours 3.5 hours
ECG/SpO
2
Manual (FAST
and Masimo)
In this mode battery life is dependent on the
usage rate and will range between the ECG
Only battery life and the ECG/SpO
2
Continuous battery life.
Monitor Mode
Non-networked
(Display On)
Battery Life
(1.4GHz
p/n 865350)
Battery Life
(2.4GHz
p/n 865351)
ECG Only 6.8 hours 6.0 hours
ECG/SpO
2
FAST
Continuous
4.7 hours 4.0 hours
ECG/SpO
2
Masimo
Continuous
4.0 hours 3.0 hours
ECG/SpO
2
Manual (Fast
and Masimo)
In this mode battery life is dependent on the
usage rate and will range between the ECG
Only battery life and the ECG/SpO
2
Continuous battery life.
The battery life specifications listed below are based on the use of the Philips
Rechargeable Lithium-ion battery.
Telemetry Mode
Networked
(Display Off)
Battery Life
(1.4GHz
p/n 865350)
Battery Life
(2.4GHz
p/n 865351)
Battery Life
(WLAN
p/n 865352)
ECG Only 30.0 hours 28.0 hours 28.0 hours
ECG/SpO
2
FAST
Continuous (ECG
Operation available)
15.6 hours (time to
No Signal INOP)
14.0 hours (time to
No Signal INOP)
15.0 hours (time to
No Signal INOP)
ECG/SpO
2
FAST
Continuous (Continuous
SpO2 Operation available)
12.0 hours (time to
No SpO2T, Batt Low
INOP)
11.0 hours (time to
No SpO2T, Batt
Low INOP P)
12.0 hours (time to
No SpO2T, Batt
Low INOP)
ECG/SpO
2
Masimo
Continuous (ECG
Operation available)
12.5 hours (time to
No Signal INOP)
11.0 hours (time to
No Signal INOP)
12.5 hours (time to
No Signal INOP)
ECG/SpO
2
Masimo
Continuous (Continuous
SpO2 Operation available)
10.0 hours (time to
No SpO2T, Batt Low
INOP)
9.0 hours (time to
No SpO2T, Batt
Low INOP P)
10.0 hours (time to
No SpO2T, Batt
Low INOP)