Label Assignment for Replacement MX40
Maintenance 5-9
Re-assigning an Equipment Label at the IntelliVue Information
Center iX
To re-assign an equipment label to a replacement device:
1. Enter the Manage Unit application (scroll down if necessary).
2. Select Label Assignment.
3. Select the entry for both the previously assigned device (on the left) and the entry for the
available device (on the right).
4. Select Replace.
5. At the MX40, select Confirm.
6. At the Information Center iX, select OK.
7. Select Refresh to confirm that the device now appears in the Assigned Devices column.
8. Confirm that the Equipment Label is now displayed on the MX40.
To Next Page
Loading...
