EasyManuals Logo

Philips IntelliVue MX40 Installation And Service

Philips IntelliVue MX40
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
Battery Specifications
10-18 Safety Standards & Specifications
Note The battery capacity of re-chargeable batteries degrades over time
and number of recharge cycles. Toward the end of its useful life, the battery
capacity may be reduced by 30%. If this reduced battery life is unacceptable
based on your use model, Philips recommends replacing the rechargeable
battery sooner.
Nominal Current
Operating Mode
Nominal Current
(p/n 865350)
Nominal Current
(p/n 865351)
Nominal Current
(p/n 865352)
ECG Only FAST (Display
inactive)
51.5 mA @ 3.6V 51.0 mA @ 3.6V 51.5 mA @ 4.1V
ECG/SpO
2
FAST
Continuous
(Display inactive)
120 mA @ 3.6V 116 mA @ 3.6V 120 mA @ 4.1V
ECG Only Masimo (Display
inactive)
51.5 mA @ 3.6V 51.0 mA @ 3.6V 51.5 mA @ 4.1V
ECG/SpO
2
Masimo
Continuous
(Display inactive)
122 mA @ 3.6V 118 mA @ 3.6V 123 mA @ 4.1V
Lithium-ion Battery Charge Time
Definition Charging Method
Charge
Time
Battery pack charge
time from 90%
depletion state
The Lithium-ion Battery Pack is charged on
a separate external charging station. It
must be removed from the MX40 to
charge.
6.5 hours

Table of Contents

Other manuals for Philips IntelliVue MX40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips IntelliVue MX40 and is the answer not in the manual?

Philips IntelliVue MX40 Specifications

General IconGeneral
BrandPhilips
ModelIntelliVue MX40
CategoryCables and connectors
LanguageEnglish

Related product manuals