Contents 1
Contents
1. Introduction 1-1
Network Connectivity ------------------------------------------------------------------ 1-2
Network Components ------------------------------------------------------------------ 1-3
2. Installation 2-1
MX40 Release C.01 Compatibility ------------------------------------------------- 2-2
Wireless Network Configuration ---------------------------------------------------- 2-3
Assigning an Equipment Label - IIC iX -------------------------------------------- 2-4
Assigning an Equipment Label - IIC ----------------------------------------------- 2-6
Assigning an Equipment Label – IntelliVue Support Tool Mark 2 ---------- 2-7
Equipment Label Character Limitations ------------------------------------------- 2-8
Clinical Configuration ------------------------------------------------------------------ 2-9
Frequency Management and Channel Selection ----------------------------- 2-10
Frequency Management ------------------------------------------------------- 2-10
Channel Selection ---------------------------------------------------------------- 2-10
865350 - Channel Selection --------------------------------------------------- 2-10
1.4GHz Smart-hopping Channel Definition ----------------------------- 2-12
865350 - Short-range Radio (SRR) Channel Selection -------------- 2-14
SRR Channel Recommendations for 865350 Installations. -------- 2-15
865351 Channel Selection ----------------------------------------------------- 2-15
2.4 GHz Smart-hopping Channel Selection ----------------------------- 2-16
865351 - Short-range Radio (SRR) Channel Selection -------------- 2-16
Smart-hopping and SRR Channel Selection for
2.4GHz Smart-hopping Networks ----------------------------------------- 2-17
865352 - Channel Selection --------------------------------------------------- 2-26
865352 Short-range Radio (SRR) Channel Selection --------------- 2-26
SRR Channel Recommendations for 865352 Installations --------- 2-28
Short-range Radio Density ---------------------------------------------------- 2-28
3. Test and Inspection 3-1
MX40 Test & Inspection Matrix ----------------------------------------------------- 3-2
When to Perform Test Blocks ------------------------------------------------------- 3-4
4. Operating Modes 4-1
Monitoring Mode ------------------------------------------------------------------------ 4-2
Telemetry Mode Use -------------------------------------------------------------- 4-2
Monitor Mode Use ----------------------------------------------------------------- 4-2
Controls, Indicators and Connectors ------------------------------------------ 4-4
MX40 Controls and Indicators ------------------------------------------------ 4-4
Multi-Function Button ----------------------------------------------------------- 4-5
Silence/Acknowledge Alarm Button ----------------------------------------- 4-5
SmartKeys Button --------------------------------------------------------------- 4-5
To Next Page
Loading...
