Monitoring Mode
4-24 Operating Modes
Caution
The MX40 Battery Adapter Tray requires routine inspection, and will
require replacement when visible signs of wear are present, including
corrosion, cracks, bends, crimping, or curling that can prevent disposable
batteries from remaining securely in the tray. It is recommended that the
MX40 Battery Adapter Tray be replaced every 12 months or when visible
wear is recognized. A date code is included on the Battery Adapter Tray to
help you identify the 12-month time period with a format of YY/MM, e.g.
15/11 meaning November 2015.
3. Insert three Duracell AA 1.5V Alkaline batteries, matching the polarity with
the + indications inside the compartment.
Note—all batteries are inserted with the + polarity in the same direction.
Use of AA batteries is not supported with the WLAN MX40 (Model
Number 865352). Use only the rechargeable lithium-ion battery.
4. Close the battery compartment door.
5. Watch for the start-up screen on the front of the MX40 to illuminate briefly.
To Next Page
Loading...
