Philips M3015A - Page 198

Part 2 Isolating and Solving Instrument Problems
182
Troubleshootin
g
the Instrument
CO
2
PURGING The Measurement
Extension is purging the
FilterLine. This occurs
when an occlusion is
detected in the line or
airway adapter. If the
occlusion is not
removed by purging,
the Measurement
Extension will go into
Standby Mode and a
“CO
2
OCCLUSION”
INOP will be displayed.
Check for an occlusion
and remove.
If necessary, replace the
FilterLine.
NO CENTRAL
MONITORING
Central monitoring has
been interrupted.
With a wireless net-
work: Check that the
Monitor has not been
moved out-of-range of
an access point and that
no microwave oven or
other non-monitoring
wireless device is inter-
fering with the Monitor.