Philips M3015A - How to Access the Monitor and Server Revision Screen

Using Service Mode
Troubleshootin
g
the Instrument 209
NBP Cycles: (information only)
The cumulative number of NBP cycles completed is shown, but cannot be modified.
Line Frequency
When operating on mains power supply, the line frequency indication is used to switch
between 50 Hz and 60 Hz for the ECG filtering frequency.
CAUTION Make sure that the Line Frequency is set correctly for the country option ordered. The factory
default is 60 Hz for all units regardless of country option.
How To Access the Monitor and Server Revision Screen
1 Press Setup.
2 Move the highlight to Revision.
3 Depending on which screen you want to display, toggle between Monitor Revision and
MeasServ Revision.