Pitco SSH Series - Page 43

PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers



SG/SSHSeriesServiceManual 43
20. Lift up and pull out the tank.
NOTE: Lifting the tank requires two (2)
technicians.
23. Rem
ove the four (4) screws, which hold the flue,
using a 5/16 inch socket and 3/8 inch close-
ended wrench.
24. Remove the return valve using two adjustable
wrenches.
21. Set tank on floor.
25. Follow steps 1 through 24 in reverse to reinstall
a new frypot.
22. Remove the drain line using a pipe wrench.