4.3.3 Access Control
4.3.3.1 Filtering
This option allows you to setup the filter rule for the packets. From the Bridge menu, click
on Access Control and then Filtering. The following page is displayed. Click on Filtering
Type drop-down list to select a filtering type first.
Protocol Filtering
Protocol Filtering Setup
Label Descri
tion
Filtering Type You can also select the filtering type here.
No. From…To…
Type in the range of serial number in the filter rule table. Valid number
value: 1 ~ 256.
Query
Once you have specified the serial number, click on this button to
display the filter rules.
- 100 -
To Next Page
Loading...
