4.1.9 SNTP
This option allows you to setup the Simple Network Time Protocol (SNTP). From the
System menu, click on SNTP. The following page is displayed.
SNTP Setup
Label Description
Time Zone
Sets the local time zone by selecting in the Time Zone drop-down list.
Sixty-five of the world’s time zones are presented (including those using
standard time and summer/daylight savings time).
System Date Sets system date (yyyy/mm/dd).
System Time Sets system time (hh:mm:ss).
Polling Interval
Sets the polling interval (in seconds) that SNTP client will sync with a
designated SNTP server.
SNTP Server address
Sets the dedicated unicast server IP address for which the SNTP client can
synchronize its time.
Modify Click on this button to submit the modification.
- 73 -
To Next Page
Loading...
Need help?
General