- 359 -
5.19.14 power-mgt l2-time
Description Set minimum time (in seconds) between an Entry into L2 low power
state and the first L2 low power trim request, and between two
consecutive L2 power trim requests
Syntax power-mgt l2-time <number>
Parameter
Name Description
<number> L2 Time value.
Valid values: 0 ~ 255 (sec)
Default value: -
Type: Mandatory
5.19.15 power-mgt l2-atpr
Description Set maximum aggregate transmit power reduction (in dB) that is
allowed at transition of L0 to L2 state or an L2 low power trim request
Syntax power-mgt l2-atpr <number>
Parameter
Name Description
<number> L2 power reduction range value.
Valid values: 0 ~ 31 (dB)
Default value: -
Type: Mandatory
5.19.16 power-mgt l2-atprt
Description Set total maximum aggregate transmit power reduction (in dB) that is
allowed in the L2 state; the total reduction is the sum of all reductions
of L2 Request (i.e., at transition of L0 to L2 state) and L2 power trims
Syntax power-mgt l2-atprt <number>
Parameter
Name Description
<number> L2 total power reduction value.
Valid values: 0 ~ 31 (dB)
Default value: -
Type: Mandatory
To Next Page
Loading...
Need help?
General