- 293 -
5.7.12 egress
Description Default PVID egress taged/untagged setting
Syntax egress {tag | untag}
Parameter None
5.7.13 force priority
Description Force priority setting (disabled: reserve the original priority of all
packets. egress: force the priority value of all packets sent out from
this bridge port’s default VLAN to be the default VLAN priority, so this
rule only works on default VLAN of this bridge port. ingress: force
applying the default VLAN priority value to all the packets received on
this bridge port (so this rule will work on all the member-set of this
bridge port). both: combine the rules of Ingress and Egress.
Syntax force priority {disable | engress | ingress | both}
Parameter None
5.7.14 igmp-acl bind
Description IGMP ACL (Access Control List) binding profile configuration
Syntax igmp-acl bind {<number> [on] | on | off | reset}
Parameter
Name Description
<number> IGMP ACL profile index.
Valid values: 1 ~ 15
Default value: 0
Type: Mandatory
5.7.15 igmp-acl max-group
Description Per port limit IGMP join group number
Syntax igmp-acl max-group <number>
Parameter
Name Description
<number> IGMP ACL profile index.
Valid values: 1 ~ 128
Default value: 8
Type: Mandatory
To Next Page
Loading...
Need help?
General