- 316 -
5.12 Access List Mode Commands
The commands in this section can be executed only in the ACL execution mode.
5.12.1 bcrate cir
Description Broadcast rate limiting CIR and LBS setting
Syntax bcrate cir <cir> lbs <lbs>
Parameter
Name Description
<cir> Committed Information Rate (bps)
Valid values: 1536 ~ 1000000000
Default value: 80000
Type: Mandatory
<lbs> Leakage Bucket Size (millisecond)
Valid values: 1 ~ 1024
Default value: 80
Type: Mandatory
5.12.2 bcrate list
Description Show broadcast rate limiting list
Syntax bcrate list
Parameter None
5.12.3 dstmac
Description Specify destination MAC address of packets to filter / Show specified
destination MAC deny access list entry / Delete specified destination
MAC deny access list entry
Syntax dstmac <number> deny {xdsl <port>/<pvc> | gigabit <port>} mac
<mac address>
dstmac <number> list
dstmac <number> disable
Parameter
Name Description
<number> Destination MAC deny access list number
To Next Page
Loading...
Need help?
General