1.5 Technical Specifications
Product IP DSLAM
Model IDL-2402
Hardware Specification
Case
1.5U high box-type with a rack-mountable enclosure
Uplink
1 x RJ-45 (10/100/1000Base-T)
Console
RS-232 Serial Port (9600, 8, N, 1)
LINE
1 x RJ-21 Connector
Ports
PHONE
1 x RJ-21 Connector
LED Indicators
1 x SYS LED
1 x ALM LED
1 x Uplink LED
24 x ADSL LEDs
Software Specification
Standard
Compliant with ADSL standard
− ANSI T1.413 issue 2
− G.dmt (ITU G.992.1)
− G.lite (ITU G.992.2)
− G.hs (ITU G.994.1)
Capable of ADSL2 standard
− G.dmt.bis (ITU G.992.3)
Capable of ADSL2+ standard
− G.dmt.bisplus (ITU G.992.5)
System
− Subscriber interface with built-in POTS splitter
− Downstream DMT data rate up to 25 Mbps
− Upstream DMT data rate up to 3 Mbps (Annex M)
− Distance up to 18 kft
− 8 PVCs per xDSL port
− DHCP forward
− DHCP relay agent
− PPPoE relay
− IPSec/L2TP/PPTP VPN pass-through function
− PPPoA to PPPoE inter-working
Bridge Function
− Supports IPv4 packet
− Supports IEEE802.1d Ethernet bridge function between trunk Ether port
and ATM VCs
− Supports static source MAC table provisioning, automatic source MAC
learning and block duplicate ones
− Supports 4K static MAC address table
− 128 MAC address per x DSL port
VLAN Function
− IEEE 802.1q Port-based / Protocol-based VLAN
− 512 non-stacked VLAN-ID simultaneously ranging from 1 to 4095
− VLAN stacking and VLAN cross-connect
− IP Spoofing prevention
− MAC anti-Spoofing
− Port isolation functionality
− Static VLAN group and membership provisioning
Multicast
− IP multicast forwarding
- 20 -
To Next Page