4.6.3 SNMP Notify
This option allows you to setup the SNMP Notification (In SNMPv1, asynchronous event
reports are called traps while they are called notifications in later versions of SNMP).
From the SNMP menu, click on SNMP Notify. The following page is displayed.
Table 0-2 SNMP Community Setup
Label Description
Notify No. This field shows the Notify number you select.
New
Click on this button to create a new SNMP Notify. After you click on New, the following
page is displayed. Type in the name and tag of the SNMP Notify and click on Apply
button.
By specifying the Notify tag, you can bind the Notify name to the SNMP target
address table. When the Notify tag is the same with the Target Tag in a SNMP target
table (refer to previous section), the notification is sent to the corresponding Target
address.
Delete Select a row and then click on this button to delete a Notify.
Modify
Select the row and type in new notify tag and then click on this button to submit the
modification.
- 171 -
To Next Page
Loading...
Need help?
General