5.1 Global Commands
The Global commands can be used in all execution modes.
5.1.1 bye
Description Exit
Syntax bye
Parameter None
5.1.2 cluster
Description Switch to a NE (network element) in the cluster
Syntax cluster <string>
Parameter
Name Description
<string> NE name in the cluster you want to switch to.
Valid values: string type value.
Default value: -
Type: Mandatory
5.1.3 cluster local
Description Switch to Master in the cluster
Syntax cluster local
Parameter None
5.1.4 disable
Description Go to Disable execution mode from logoff mode
Syntax disable
Parameter None
5.1.5 end
Description Return to Enable mode
Syntax end
Parameter None
5.1.6 exit
Description Go to previous execution mode
Syntax exit
Parameter None
- 212 -
To Next Page
Loading...
Need help?
General