- 358 -
see all the operation modes.
Default value: -
Type: Mandatory
5.19.9 pbomode
Description Set power backoff operation mode ON/OFF
Syntax pbomode us {on | off}
Parameter None
5.19.10 power-mgt disable
Description Disable power management function for ADSL
Syntax power-mgt disable
Parameter None
5.19.11 power-mgt l2 enable
Description Allow autonomous L2 state entry/exit
Syntax power-mgt l2 enable
Parameter None
5.19.12 power-mgt l2_l3 enable
Description Allow autonomous L2 and L3 state entry/exit
Syntax power-mgt l2_l3 enable
Parameter None
5.19.13 power-mgt l0-time
Description Set the minimum time (in seconds) between Exit from L2 low power
state and the next Entry into the L2 low power state
Syntax power-mgt l0-time <number>
Parameter
Name Description
<number> L0 Time value.
Valid values: 0 ~ 255 (sec)
Default value: -
Type: Mandatory
To Next Page
Loading...
Need help?
General