- 363 -
5.21 Dot1x Mode Commands
The commands in this section can be executed only in the Dot1x execution mode.
5.21.1 auth-method
Description Set priorities of the different authentication methods
Syntax auth-method <index> {none | radius_1 | radius_2 | radius_3 | profile}
Parameter
Name Description
index Authentication method priority.
Valid values: 1-4
Default value: -
Type: Mandatory
5.21.2 server <number> ip
Description Set RADIUS Server IP address
Syntax server <index> ip <ipv4 address>
Parameter
Name Description
index RADIUS Server index.
Valid values: 1-3
Default value: -
Type: Mandatory
ipv4 address RADIUS Server IP address
Valid values: -
Default value: -
Type: Mandatory
To Next Page
Loading...
Need help?
General