- 312 -
5.11 IPoA Configure Mode Commands
The commands in this section can be executed only in the IPoA configure mode.
5.11.1 brasmac
Description Display Broadband RAS MAC address by index
Syntax brasmac <number>
Parameter
Name Description
<number> Broadband RAS MAC Table Index
Valid values: 1 ~ 48
Default value: -
Type: Mandatory
5.11.2 brasmac list
Description Show Broadband RAS MAC address table
Syntax brasmac list
Parameter None
5.11.3 cpriority
Description Customer VLAN Priority setting
Syntax cpriority <prio ID>
Parameter
Name Description
<prio ID> Customer VLAN Priority value
Valid values: 0 ~ 7
Default value: -
Type: Mandatory
To Next Page
Loading...
Need help?
General