Planet IDL-2402 - Show Atm-Loopback; Show Atmdesc; Show Cli-Config; Show Cluster

5.3.18 show atmdesc
Description Display ATM descriptor
Syntax show atmdesc
Parameter None
5.3.19 show atm-loopback
Description Display ATM loopback status (by port)
Syntax show atm-loopback [<port>]
Parameter
Name Description
<port> Port number
Valid values: 1~24(48)
Default value: -
Type: Optional
5.3.20 show cli-config
Description Display current setting for CLI configuration (timeout value, session
value)
Syntax show cli-config
Parameter None
5.3.21 show cluster
Description Display cluster configuration / Display cluster member list / Display
cluster status
Syntax show cluster {config | member | status}
Parameter None
5.3.22 show cpu
Description Display CPU information
Syntax show cpu
Parameter None
5.3.23 show dot1x
Description Display 802.1x information
Syntax show dot1x
Parameter None
- 220 -