4.4.2.2 Loop Test
This option allows you to do the ADSL Dual End Loop Test. From the ADSL menu, click
on Data & Inventory and then Loop Test. The following page is displayed.
Click on the drop-down list and select the line port you want to test. Then click on
Diagnostics Run to start a DELT. If you want to discontinue the test or make the loop go
back to the normal state when the test has finished, just click on Diagnostics Abort.
Test in progress: Click on Diagnostics Run and then the following page is displayed.
- 154 -
To Next Page
Loading...
