4.3.1.4 ADSL Port Security
This option allows you to setup the ADSL port security. From the Bridge menu, click on
Interface Setup and then ADSL Port Security. The following page is displayed:
You shall click on the drop-down lists to select port range and PVC first. Then the data of
these PVCs (bridge ports) you selected will be displayed. Click on the radio button to
select the bridge port you want to modify.
ADSL Port Security Setup
Label Description
Max MAC
Type in the maximum number of MAC addresses that can be learned by the
ADSL bridge port (1 ~ 128).
MAC Learning
Select to enable/disable MAC learning ability. Sometimes you can disable
MAC learning on specified bridge port. This function is for 1:1 VLAN
translation scenario.
IP Allowed
Select to enable/disable IP Allowed function. When you enable IP Allowed
function on a bridge port, this bridge port will work according to the Static
Allowed IP table (refer to section 4.3.2).
- 90 -
To Next Page
Loading...
Need help?
General