Platan Proxima - Page 10

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
10
 Server call ringtones – phone ringing tones. The ringtone depends on the call
type. Rhythms of ringtones are set up in the program (menu: Common settings
→ Rhythms → Analogue phones) . Default (factory) ringtone settings are
presented below:
o Extension call ringtone – a periodic intermittent tone informing you
about an incoming internal call:
• 0.25 d / 0.25 p / 0.75 d / 3.75 p
o External call ringtone – a periodic intermittent tone informing you
about an incoming external call:
• 1 d / 4 p
o Alarm call ringtone – a periodic itermittent tone informing you about
an alarm (or a wake-up call):
• 0.25 d / 0.25 p
o Group call ringtone – a periodic intermittent tone informing you
about a Hunt Group call:
• 0.5 d / 0.5 p
o DISA call ringtone – a periodic intermittent tone informing you about
an external call incoming in a DISA mode:
• 0.75 d / 0.25 p / 0.25 d / 3.75 p
o Doorphone call ringtone – a periodic intermittent tone informing you
about an incoming call from a door phone:
• 0.25 d / 0.25 p / 0.25 d / 0.25 p / 0.5 d
/ 0.25 p / 0.5 d / 0.25 p
o Voicemail call ringtone:
• 0.25 d / 0.75 p
where 0.25 d – stands for 0.25-second ringtone
0.5 p – stands for 0.5-second pause
Different call ringtones can be defined in the program for proprietary
phones.
DECT, ISDN and analogue phones with pre-installed tunes may not support
the ringtones described above.