Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
Hang up the phone.
The server will be trying to establish a connection with the number you have
selected for the period of time determined in the computer program. The number
(1-10 times) and the frequency (every 1-30 minutes) of repetitions are determined
as well. After the connection has been established, your telephone will ring with a
calling ringtone. If you are having a telephone conversation at that moment, you
will hear an offering tone informing you about an incoming call. At the same time,
the outside party will hear a voice announcement defined in the computer program,
e.g. Your call is being connected, please wait... If you fail to answer the call within
the time defined in the program (10-100 seconds), the server will disconnect it, at
the same time cancelling the booked service.
In order to cancel the booked service, dial
All booked external calls will be cancelled.
4.2.15 Speed dialling
The server offers speed dialling possibility thanks to the bank of short numbers
common for all server users. After the short number has been selected, the server
will establish a connection with the number recorded in this entry. The bank may
contain up to 1000 numbers. Each speed dial number may be composed of up to 16
digits, each real number - up to 24 digits. The numbers are entered using the
computer program (see: Call distribution → Speed dialling). External numbers
must be preceded by the number of the trunk lines bunch through which the
connection is to be established (0, *81,...,*84) or by the trunk line number, e.g.
*80a*b*c#.
As a standard, access to the server functions is gained by pressing the * key. In this
case, speed dial numbers should be selected by pressing the # key.
If, according to the settings, the server functions are accessed “after pressing #” or
“with no special symbol,” the speed dial number should always be selected by
pressing “*”.
If you wish to establish a connection with the selected speed dial number:
Dial # X.., where X.. stands for the speed dial number defined in the
computer program (up to 16 digits).
A connection with the selected number recorded in the form of a speed dial
number will be established.
To Next Page
Loading...