Platan Proxima - Calling Onto the Proprietary Phone Speaker

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
42
If you want to use the group call function:
Pick up the phone.
Dial a Hunt Group dialling number.
A Hunt Group user to pick up the phone first will speak with the caller.
If a Hunt Group user has the voicemail forwarding on, the forwarding is not carried
out if this Hunt Group is called.
In addition, the server allows you to:
– forward calls to Hunt Groups,
– dial the Hunt Group dialling number in the DISA mode,
– assign a DDI number to a Hunt Group.
The Hunt Group dialling number cannot be the same as any other number within
the server e.g. extension users' numbers.
A Hunt Group dialling number differs from its ordinal number. One must ensure,
especially when using the Logging into and out of a Hunt Group, that the dialling
number is not confused with the ordinal number.
4.2.10 Calling onto the proprietary phone speaker
The server makes it possible to send messages directly onto the proprietary phone
speaker. In order for a user to use this function, they must be granted the
speakerphone call privilege in the computer program (menu: Extensions →
Service classes).
If you want to make a call directly onto the proprietary phone speaker phone:
Pick up the phone.
Dial TEL,
where TEL – proprietary phone number.
After one call tone, a speaker circuit will switch on in the proprietary
phone and it will be possible to communicate the message.