Platan Proxima - Direct Access to a Voicemail Box

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
98
7.1.5 Direct access to a voicemail box
Connection with the voicemail may be established by dialling any of the two
voicemail box access numbers. Both numbers are to be defined in the computer
program and should be provided to the user by the installer.
• the first number enables local access, i.e. access using your own
telephone;
• the second number enables remote access; after this number, the
extension number and the password have been entered, access to the
authenticated user's voicemail box is granted using an extension
telephone other than your own one or from the external line.
ACCESS TO A VOICEMAIL BOX – LOCAL
You are either calling using your own telephone or are logged in as a virtual user.
Pick up the phone.
Enter the voicemail local access number.
If the local access password is set, you will hear the following message:
“Enter your voicemail password and press #”
Enter the required password and press #.
You are now in your personal voicemail box – Voicemail Menu main
level.
ACCESS TO A VOICEMAIL BOX – REMOTE
You are calling through a trunk line or using any telephone connected to the server.
Pick up the phone.
If you are calling from the outside, call the server external number and
while in the
DISA mode, enter the voicemail remote access number.
If you are calling using an extension phone, enter the remote access
number.