Platan Proxima - Internal Conference for 8 Extension Users

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
58
4.3.2 Internal conference for 8 extension users
A conference may be opened and initiated only by an extension user having proper
privileges (Transferring internal calls) granted in the computer program (menu:
Extensions → Service classes). Other users may be added only by the user who has
opened the conference.
In order to establish a conference connection:
Pick up the phone.
Dial the server extension number.
When the called user answers, you may add other ones. In order to do
this:
Dial (or symbol set as FLASH for IP phone or external port
equipment) TEL, where TEL stands for the extension number of the
server user.
The waiting user will hear a voice announcement or a tune, depending on the
settings defined in the computer program (see: HOLD function).
After the connection with this user has been established, dial
When the user picks up the phone, a conference connection involving
three users is established.
Every other user is added in a similar manner by dialling:
or symbol set as FLASH for IP phone or external port equipment TEL
(and after the connection has been established)
When subsequent users are being added to the conference, the call is not
put on hold (no voice announcement is heard).
The *7 sequence may also be pressed before the extension number is dialled
(Flash – *7 – extension number). In this case, when the added user picks up the
phone, the server instantly establishes a conference.