Platan Proxima - Calling a Voicemail Inbox

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
96
forwarding to TEL when MY VoIP phone is not reachable”). The function
is executed when:
o the VoIP extension is logged out
o 100/Proceeding answer
o no answer (eg. phone disconnected).
In order for the voicemail inbox to be called as described above, call forwarding to
the voicemail local access number must be set. Voicemail access number (dialogue
box: Extensions → Voicemail → Global settings) and forwardings (dialogue box:
Extensions → Call forwarding) are configured in the computer program. Call
forwarding may also be programmed using the telephone (see: Call forwarding...).
7.1.3 Calling a voicemail inbox
The server directs the call to your extension number.
If your voicemail inbox is active and call forwarding to the voicemail box
has been set, the call will be forwarded.
After the voicemail inbox has been called, the calling party hears
a welcome announcement – either a standard one or recorded by the
user. A standard welcome announcement is as follows:
“You are connected to the voicemail ....
Please, leave your message after hearing the bip.
Hang up as soon as you’re done.”
Then, a single tone is generated and the message starts to be
recorded.
The message registering process may be deactivated. In such a case, the
voicemail box will play taped messages. When the user is absent, e.g.
information about the possible method of contact at a given moment may
be played.
It is possible to register the connection attempt. The voicemail box records
such an occurrence as a new message. When the message is being listened
to, information that the user has left no message is played.