Platan Proxima - Call through; Capturing and Returning Calls

Proxima, Libra firmware ver. 2.12.xx
rev. 2.12.01
27
4.1.12 Call Through
Call Through is an external return call (transit call) with automatic authorisation. It
permits to make calls from authorised numbers (e.g. mobile phones) on the server’s
expenses.
First, the external numbers authorised to make Call Through should be defined in
the computer program. The authorised user, after having connected to the Proxima
or Libra server and after having heard the voice announcement, dials the escape
code (‘0’ or any other digit or code defined by the installer) to reach the trunk line,
and then dials an external number to call. After a correct automatic authorisation
the server will establish an external return call.
Call Through calls will be registered in the Penny billing module under number
9994.
4.1.13 Capturing and returning calls
You hear your colleague's phone ringing or an incoming call is signalled on the
proprietary phone or on the console. If you wish to capture this call:
Pick up the phone.
Dial TEL,
where TEL stands for the number of the extension user whose call you
are capturing.
You have captured a call directed to another user.
In the manner described above, you may either capture external calls or
internal calls provided that you have been granted the necessary
privilege and that you know the number of the called phone.
The server makes it possible to capture a call directly from the proprietary phone
and console speed dialling buttons. However, it is required that the called number
be defined under the speed dialling button.